| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours After-Sale Service |
| Color: | Black |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Standard Requirement | Measured Value | Reference Standard |
| Width | Customizable | / | / |
| Thickness | Customizable | / | / |
| Color | / | White | / |
| Thermal Conductivity | Temperature 25°C | ≤0.023W/m·K | GB/T 10295-2008 |
| Temperature 100°C | ≤0.03W/m·K | ||
| Temperature 300°C | ≤0.036W/m·K | GB/T 10294-2008 | |
| Temperature 500°C | ≤0.072W/m·K | ||
| Bulk Density | 0.18-0.20g/cm³ | 0.19g/cm³ | GB/T 5480-2017 |
| Compressive Strength (KPa) | Compression 25% | 120KPa | GB/T 5480-2014 |
| Volumetric Water Absorption (%) | ≤1.0% | 0.62% | GB/T 5480-2017 |
| Temperature Resistance (°C) | >1200°C | 1250°C | GB/T 17480-2015 |
| Flame Retardant Rating | UL | V-0 | UL-94V0 |
| Category | Parameter | Details |
| Meaning | Vertical Burn Test | Specimen mounted vertically; flame impinges directly on surface (more severe than horizontal) |
| Flame Application | 500 W methane flame applied to surface and edges 5 times for 5 s each | |
| Self-Extinguishing Time | ≤ 60 s after each flame application | |
| Drip Requirement | No flaming drips that ignite underlying cotton | |
| Specimen Integrity | No burn-through; for specimens ≤ 3 mm thick must also remain intact | |
| Comparison | 5VA | Vertical/horizontal burn; high-demand sectors (aerospace, batteries, data centers); highest level (no burn-through at ≤ 3 mm) |
| 5VB | Vertical burn; general industrial equipment; burn-through allowed (self-extinguish time required) | |
| V-0 | Vertical burn; electronic enclosures; self-extinguish ≤ 10 s | |
| V-1 | Vertical burn; standard FR needs; self-extinguish ≤ 30 s | |
| HB | Horizontal burn; low-risk applications; slow horizontal burn only | |
| Applications | New Energy Batteries | Battery pack fire barriers (e.g., Tesla modules) |
| Data Centers | Fireproof server-rack materials for supercomputing centers | |
| Aerospace & Defense | High-temperature components, satellite insulation | |
| High-End Electronics | EV charging stations, PCB substrates | |
| How to Achieve | Material Selection | Use brominated or phosphorus-based flame retardants; glass-filled PA66 or specialty engineering plastics |
| Process Optimization | Multi-layer composites (e.g., aerogel + ceramic fiber); fire-retardant surface coatings | |
| Notes | Thickness Effect | Stricter burn-through test for specimens ≤ 3 mm |
| Certification | Requires UL laboratory testing and ongoing Follow-Up Service audits |
| Product Category | Glass Fiber Battery Aerogel | Glass Fiber Wet-Process Battery Aerogel | Ceramic Fiber + Silicon Dioxide Aerogel |
| Composition | Glass Fiber + Silicon Dioxide Aerogel | Glass Fiber + Silicon Dioxide Aerogel | Ceramic Fiber + Silicon Dioxide Aerogel |
| Color | White | White | White |
| Application | Energy Storage / Electric Furnaces / Petrochemicals | New Energy Vehicles | New Energy Aircraft / New Energy Ships / Industrial Furnaces / Electric Furnaces / High-Speed Trains / Shield Tunneling Machines / Wearable Devices / Communication Base Stations / Transportation / Household Appliances, etc. |
| Product Model | XK-BX01 | XK-BX02 (UL Certified) | XK-BX03 |
| Thermal Conductivity | ≤ 0.021 W/m·K | ≤ 0.021 W/m·K | ≤ 0.021 W/m·K |
| Compression Resilience | > 90% | > 90% | > 90% |
| Thermal Insulation Performance | 700ºC≤350ºC(3.5mm) 600ºC≤270ºC(2.0mm) 500ºC≤250ºC(1.7mm) |
700ºC≤250ºC(3.5mm) 600ºC≤170ºC(2.0mm) 500ºC≤150ºC(1.7mm) |
700ºC≤300ºC(3.5mm) 600ºC≤220ºC(2.0mm) 500ºC≤200ºC(1.7mm) |
| Insulation | ∞ | ∞ | ∞ |
| Withstand Voltage | Leakage current under all conditions < 0.001mA | Leakage current under all conditions < 0.001mA | Leakage current under all conditions < 0.001mA |
| Hydrophobicity | > 98% | > 98% | > 98% |
| Flame Retardant | V-0 | V-0 | V-0 |
Chemical Film-Forming Aerogel Fireproof Thermal Insulation Felt: A New Frontier in Insulation Technology
Harnessing the pinnacle of nanoaerogel and glass fiber composite technology, this groundbreaking product, infused with state-of-the-art chemical film-forming processes, redefines excellence in fireproofing and thermal insulation. Skyboys (Hangzhou) Technology Co., Ltd. proudly presents an innovation that sets new benchmarks for safety and efficiency.
Meticulously crafted from a sophisticated amalgam of nano aerogel, glass fiber, pre-oxidized fiber, among other premium materials, this composite marvel seamlessly blends the unparalleled aerogel performance with the versatility of flexible base materials. This masterful fusion not only maximizes the aerogel's innate lightweight and thermal insulation capabilities but also enhances flexibility and durability, making it an indispensable solution for modern insulation challenges.
Core Technologies:
Chemical Film Coating: A Revolutionary Process in Aerogel ApplicationThis pioneering approach supersedes the conventional supercritical extraction method, significantly boosting the aerogel's penetration and adhesion properties, ensuring superior application outcomes and durability.
High-Temperature Atmospheric Drying: A Game-Changer in Aerogel Production This innovative drying technique not only reduces production costs but also enhances the overall stability and reliability of the aerogel product, ensuring consistent performance across applications.
| Item parameter | |
| Thermal Conductivity | 0.018-0.023 W/(m·K) |
| Fireproof Rating | A1 (GB/T 25352-2010) |
| Operating Temperature | -200°C to 650°C |
| Long-Term Shrinkage | ≤1% (650°C) |
| Density | 160-240 kg/m³ |
| Water Absorption | ≤0.02% |
| 10mm products, Civil Aviation Administration test 1000C, 30 minutes of open flame does not burn through, the back heat flow value is very low | |
Glass Fiber Chemical Film-Formed Aerogel Fireproof Insulation Felt: A Shield Against Extreme Temperatures
| Attribute | Specification |
| Width | Customizable |
| Thickness | Customizable |
| Color | White |
| Max Operating Temperature | 1200°C |
| Thermal Conductivity @ 25°C | ≤0.021 W/m·K |
| Thermal Conductivity @ 300°C | ≤0.036 W/m·K |
| Vibration Compression Set Rate | ≥-1.0% |
| Heat Aging & Multi-Cycle Stability | ≥-0.0% |
| Compression Resilience | ≥90% |
| Flammability | A Grade (Completely Non-combustible) |
| Hydrophobic Performance | ≥99% |
Unyielding Burn-Through Resistance: Test Results That Speak Volumes
| Test Item | 1mm | 2mm | 3mm |
| Burn-Through Time | 20s | 5 min 23s | 15 min |
Through stringent testing conducted by the Civil Aviation Authority, our 10mm product displayed extraordinary resilience, enduring intense 1000°C temperatures for a full 30 minutes without burn-through, all while maintaining minimal backside heat flow. This outstanding performance speaks volumes about our product's unmatched fireproofing capabilities.
Pre-Oxidized Fiber Chemical Film-Formed Aerogel Fireproof Insulation Felt: The Ultimate in Fireproofing Innovation
| Attribute | Specification |
| Width | Customizable |
| Thickness | ~5mm |
| Color | Black |
| Thermal Conductivity @ 25°C | 0.022 W/m·K |
| Dielectric Strength | <0.1mA |
| Insulation Resistance | ≥500Ω |
| Flame Retardant Level | V0 |
| Hydrophobic Performance | ≥98% |
| ROHS 2.0 | Compliant |
| REACH | Compliant |
Core Product Advantages
1) Exceptional Thermal Insulation
Ultra-Low Thermal Conductivity: Dive into a new era of heat insulation with an astonishing thermal conductivity of just 0.018-0.023 W/(m·K). This is a mere fraction-only 1/5-compared to conventional materials, delivering unmatched proficiency in halting heat transfer and ensuring your environment remains perfectly temperate.
Wide Temperature Range: Expertly engineered to perform effortlessly from 200°C to 650°C, this product exhibits remarkable durability and steadfastness, even under the severest of conditions, ensuring reliable operation across a vast temperature spectrum.
2) Top-Tier Fire Safety
A1 Fireproof Certification: Earns the prestigious A1 rating under GB/T 25352-2010, standing firm against direct flames at daunting temperatures of 1200°C-1600°C for an impressive 30 minutes. This sets an illustrious benchmark in fire safety, offering peace of mind and security.
Hydrophobic & Moisture-Resistant: Designed with a cutting-edge 3D network structure that masterfully repels water, maintaining its shape and functionality. It ensures no deformation or settling, preserving the product's excellence and prolonging its lifespan.
3) Long-Term Durability
Weather Resistance: Crafted to withstand the relentless as sault of UV radiation, this product boasts an exceptional lifespan that surpasses 20 years. It ensures your investment remains shielded against nature's elements, providing enduring value and protection.
High-Temperature Stability: Demonstrates superior resilience with a minimal shrinkage rate of ≤1% at extreme heat levels of 650°C. This ensures that the product retains its form, resisting any risk of melting or powdering, thus securing long-lasting reliability.
4) Lightweight & Eco-Friendly
Ultra-Light Density: With an incredibly lightweight density of just 160-240 kg/m³, this product makes installation and handling remarkably simple, greatly enhancing efficiency and reducing the burden on your operations.
100% Recyclable: Committed to sustainability, this product emits no toxins during production and can be fully recycled at the end of its lifecycle. It presents an eco-friendly solution for a greener tomorrow, aligning with environmental preservation goals.
Application
Building and Construction: Discover the ultimate energy efficiency with Skyboys Aerogel Insulation Blanket. Perfect for walls, roofs, and floors, it significantly minimizes heat loss, elevating thermal performance to new heights.
Industrial Insulation: Engineered for top-tier industrial use, our insulation blanket is applied to pipes, tanks, and equipment to consistently uphold optimal process temperatures, effectively curtailing unnecessary heat loss.
Automotive and Aerospace: Experience cutting-edge lightweight thermal insulation with Skyboys Aerogel in vehicles and aircraft, designed to enhance fuel efficiency and reduce energy consumption without sacrificing performance.
Clothing: Incorporate exceptional thermal insulation into high-performance outdoor and protective clothing. Our aerogel blanket ensures warmth, while remaining lightweight and flexible, perfect for extreme conditions.
Electronics: Achieve superior heat management in electronic devices and systems with our aerogel solution, protecting components from overheating and ensuring optimal performance.
Oil and Gas Industry: Ensure the robustness of pipelines and equipment in the oil and gas sector with our advanced insulation, crafted to maintain fluid temperatures and prevent unwanted freezing or heat dissipation.
Cryogenics: Depend on our cutting-edge cryogenic insulation systems to significantly minimize heat transfer and maintain extremely low temperatures, essential for advanced cryogenic applications.
Cost Reduction: Unlock unparalleled savings of up to 30% on production costs through our revolutionary chemical film-forming process. This cutting-edge technique surpasses traditional drying methods, leading to substantial cost efficiency.
Performance Enhancement: Witness an extraordinary 50% elevation in fireproof and thermal insulation capabilities, maintaining the same thickness for superior performance.
Customization: Craft your perfect solution with our customizable options, offering thickness variations from 3mm to 50mm and density ranges from 60 to 200 kg/m³, tailored to meet your specific needs.
){kind=link}